| Shoulder Milling |
CXAN Series
．Use ANMX double-sided inserts with 4 cutting edges.
．Positive rake angle design for lower side cutting forces.
．Max. 15mm depth of cut, cutter diameter 40~100mm.
| View file |
CXXN Series
．Use XNMX double-sided inserts with 6 cutting edges.
．Economic and high performance shoulder milling application.
．17~125mm cutter diameter, max. 7mm depth of cut.
| View file |
CAPK Series
．Use APKT inserts with 2 cutting edges.
．Optimized chip breaker for various applications and materials.
．16~125mm cutter diameter, max. 11mm depth of cut.
| View file | View file(Inch) |
CART Series
．Use WRT inserts with 2 cutting edges.
．Strong chip breaker provides well ramping and slotting capabilities.
．10~26mm cutter diameter, max. 7mm depth of cut.
| View file |
CASP Series
．Use SPMG inserts with 4 cutting edges.
．Cost effective shoulder milling tools.
．12~80mm cutter diameter, max. 6mm depth of cut.
| View file |
CAXD Series
．Use XDMT inserts with 2 cutting edges.
．Cutting edge design provides stable machining and reduces vibration during machining
．16~32mm cutter diameter, max. 10mm depth of cut.
| View file |
CAXO Series
．Use XOMT inserts with 2 cutting edges.
．Optimized chip breaker reduces heat generation and cutting forces.
．6~32mm cutter diameter, max. 7mm depth of cut.
| View file |
CBAP Series
．Use APMT inserts with 2 cutting edges.
．Low cost and various geometric designs for versatile applications.
．16~80mm cutter diameter, max. 11mm depth of cut.
| View file |
CR39 Series
．Use W390 inserts with 2 cutting edges.
．Optimized chip breaker for high efficient shoulder and side milling.
．16~125mm cutter diameter, max. 11mm depth of cut.
| View file |
CR49 Series
．Use W490 inserts with 4 cutting edges.
．Great repeat side milling capability to reduce burs and get good surface finishing.
．20~80mm cutter diameter, max. 9mm depth of cut.
| View file |
CWEX Series
．Use AXMT inserts with 2 cutting edges.
．Strong cutting edges for high removal rate shoulder milling.
．16~100mm cutter diameter, max. 11mm depth of cut.
| View file |
CWMM Series
．Use APMT inserts with 2 cutting edges.
．Cutter with over-center design for drilling and milling.
．10~50mm cutter diameter, max. 11mm depth of cut.
| View file |